台湾宾果

聚丙烯酰胺-絮凝劑-聚丙烯酰胺廠家-陰陽非離子聚丙烯酰胺-博源新材

河南博源新材料有限公司

0373-5467118188-3872-2360

熱門關鍵詞:  聚丙烯酰胺  廠家  PAM  陽離子  電鍍    乳液  價格  制藥  應用領域

您的位置: > 產品展示 > 水處理專用聚丙烯酰胺 > 電鍍廠廢水處理聚丙烯酰胺 > 電鍍廠廢水專用聚丙烯酰胺

咨詢熱線

0373-5467118
1/1
電鍍廠廢水專用聚丙烯酰胺
電鍍廠廢水專用 聚丙烯酰胺 ElectroplatingWastewaterpolyacrylamide 電鍍廠廢水處理聚丙烯酰胺廢水大體可分為化學廢水和工業廢水。化學廢水主要是鍋爐補給水處理系統產生的廢水以及鍋爐排污
全國熱線

0373-5467118

電鍍廠廢水專用  Electroplating Wastewaterpolyacrylamide
 
  電鍍廠廢水處理聚丙烯酰胺廢水大體可分為化學廢水和工業廢水。化學廢水主要是鍋爐補給水處理系統產生的廢水以及鍋爐排污產生的廢水。工業廢水主要是工業冷卻水、地面沖洗水以及循環排污水。鍋爐酸洗廢水、鍋爐排污水等化學廢水,因其排放量大、懸浮物高、pH值也不符合污水綜合排放標準要求,就地處理困難大,需集中起來處理。   
Electroplating wastewater polyacrylamide can be divided into chemical wastewater and industrial wastewater. Chemical wastewater is mainly produced by boiler recharge water treatment system and boiler sewage. Industrial wastewater is mainly industrial cooling water, surface flushing water and circulating sewage. Chemical wastewater, such as boiler pickling wastewater and boiler sewage, because of their large discharge, high suspended solids and high pH value, can not meet Wastewater discharge standards, it is difficult to deal with them locally, and they need to be dealt with collectively.
 
 聚丙烯酰胺廠家
       電鍍廠水處理聚丙烯酰胺分子量大不意味著性能就好,分子量小也不意味著性能就差,主要還是要看用途,如果在污水處理領域用來脫泥,還得結合脫泥設備和污泥性質,如果是用在傳統的履帶式壓濾機,分子量很高可能會導致濾布堵塞,脫水性差等問題,影響脫水效果;如果用在離心式脫泥機,因其工作原理不同,分子量要求就要高一點,要求產生的絮團能盡量耐剪切,也可以理解為絮團要足夠結實,所以要選擇分子量較高的產品。
Large molecular weight of polyacrylamide in electroplating plant water treatment does not mean good performance, and small molecular weight does not mean poor performance, mainly depending on the use. If it is used in the field of sewage treatment for desliming, it must be combined with desliming equipment and sludge properties. If it is used in the traditional crawler filter press, high molecular weight may lead to clogging of filter cloth, poor dewaterability and other issues, affecting desliming. Water effect; if used in centrifugal desliming machine, because of its different working principle, the molecular weight requirement should be higher. The flocs produced should be as shear-resistant as possible. It can also be understood that the flocs should be strong enough, so should select higher molecular weight product.
 
熱品推薦 / Hot product
電鍍廠廢水專用聚丙烯酰胺

電鍍廠廢水專用聚丙烯酰胺

電鍍廠廢水專用 聚丙烯酰胺 ElectroplatingWastewaterpolyacrylamide 電鍍...
聚丙烯酰胺可以處理煉鋼廠廢水

聚丙烯酰胺可以處理煉鋼廠廢水

主要是以氧氣頂吹轉爐煙氣凈化廢水,通常稱為轉爐除塵廢水。...
聚丙烯酰胺在電子、電鍍廢水處理中的應

聚丙烯酰胺在電子、電鍍廢水處理中的應

聚丙烯酰胺在電子、電鍍廢水中的應用:聚丙烯酰胺常用處理工...
電鍍廢水如何選用聚丙烯酰胺

電鍍廢水如何選用聚丙烯酰胺

電鍍廢水用聚丙烯酰胺,電鍍線路板行業廢水水質較復雜,廢水...